DDP ten thousand sticky anticorrosive glue

1、Product overview

DDP Wanvis Anticorrosive Elastic Adhesive is an elastic coating sealant prepared based on the main components of special silicone resin and other active additives. After the glue contacts the air, it cross-links with the moisture in the air, and gradually solidifies from the surface to the inside to become an elastomer. The coating glue can be applied on various planes or vertical surfaces to form a uniform thickness coating. After hardening, the coating is dense and elastic and has excellent weather resistance, water resistance, salt spray resistance, and ultraviolet resistance.。

2、Features and typical uses

Good flowability, low shrinkage; full surface after curing, high gloss; excellent UV resistance, can maintain long-term elasticity and adhesion even in harsh natural environments; good adhesion, suitable for coating on various substrates on. DDP Wan adhesive can form a dense elastic film after curing, which is suitable for waterproof, anti-corrosion and protection. It can be applied by brushing, spraying, pouring, etc. It has excellent adhesion to metal, plastic, glass and other materials, and can be directly coated on various materials.

3、the characteristics are as follows

Product model DDP-600 million viscous anticorrosive elastic adhesive Chemical type Special silicone resin

Appearance (uncured) semi-flowing paste ingredients single component-no mixing, solvent-free viscosity and semi-flowing, can be brushed or poured

Curing characteristics: Moisture in the air can initiate curing, and then begin to deepen from the surface to the inside.

Application Special application of anti-corrosion, weather-resistant coating or sealing. Unique advantages for outdoor pipeline protection. Salt spray resistance and UV resistance. Construction temperature 5~40℃ Long-term temperature resistance range -60℃~120℃

Material properties before curing: ● Specific gravity @25℃ 1.4 ● Fluidity semi-flowing ● Surface drying time (min) 50 ●Curing speed, mm/day 2 Typical properties of the material after curing Tensile strength, MPa ≥1.2 Elongation at break, % ≥150 hardness, Shore A 35.

Construction tips: The coated parts must be cleaned and dried before construction to ensure that there is no oil and water. Before the surface of the rubber layer hardens, please do not be covered by rain or snow. Before the glue is cured, pay attention to protect it from external impact and scratch damage. The surface drying time and curing speed of the glue are highly related to the ambient temperature, and will be significantly accelerated at high temperatures. Suitable for construction temperature +10~+40℃, the surface temperature of the workpiece is high when the workpiece is exposed to the sun, please do not directly coat the construction on the high temperature surface. After long-term storage, part of the product may settle. Please stir well before use. Due to the diversity and differences of materials, especially rubber, plastic, coating and other substrates, the bonding performance must be tested before use.

Color: ● White, gray, black, blue (other colors can be customized according to customer needs).

Packaging: ● This product uses 600ML flexible packaging.

Precautions: ● The product will release trace chemical substances during the curing process. The workplace should maintain adequate ventilation. After curing, the product is non-toxic to the human body. ● Avoid direct contact with skin and eyes; operators should wear suitable protective clothing, protective gloves and masks. If it adheres to the skin, wipe it with a dry cloth and rinse with water; if it comes in contact with the eyes, rinse with plenty of water for more than 15 minutes. If the symptoms cannot be relieved, seek medical attention. ● After the product is completely cured, there is no toxicity. ● Keep away from children. ● Do not swallow.